home *** CD-ROM | disk | FTP | other *** search
/ Floppyshop 2 / Floppyshop - 2.zip / Floppyshop - 2.iso / diskmags / 0022-3.564 / dmg-0085 / 259.txt < prev    next >
Text File  |  1997-04-16  |  9KB  |  244 lines

  1. =========================================================================
  2.  
  3. INFO-ATARI16 Digest         Sun, 25 Feb 90       Volume 90 : Issue  259
  4.  
  5. Today's Topics:
  6.                              2 Harddrives
  7.                          Directory Limits??!!
  8.                                  OS-9
  9.                    Terminal desk accessory (2 msgs)
  10.   Will MacPrint Work Under Mac Emulation & Print to HP Laserjet IIp
  11. ----------------------------------------------------------------------
  12.  
  13. Date: 23 Feb 90 16:42:36 GMT
  14. From: trwrb!root@ucbvax.Berkeley.EDU  (root)
  15. Subject: 2 Harddrives
  16. Message-ID: <292@trwrb.UUCP>
  17.  
  18. Well I finally managed to connect another drive to my SH204.  This is what
  19. I did.  The details are intended to help lay man like myself.
  20.  
  21.  
  22. Equipment list.
  23.  
  24.   1.  SH204 harddrive which includes:
  25.       a) tm562 20mg drive mechanism
  26.       b) adaptec board
  27.       c) Atari board
  28.       d) fan
  29.       e) 50 pin adaptec board cable
  30.  
  31.       The SH204 manual states this drive uses MFM, ST506/412, and
  32.       5 megabytes/sec transfer rate.
  33.  
  34.   2.  130 watt external power supply ( my original SH204 power
  35.       supply had to be replaces months ago).
  36.  
  37.   3.  ST251-1 28 ms 40 mb drive mechanism. ($330).  This drives uses
  38.       MFM and ST506/412.  The new drive I bought came with instructions
  39.       that explained how to set the new drive to drive #1.  These
  40.       instructions also explained how and when to remove the terminal resistor
  41.       pack.  I also bought and returned a used drive that was not
  42.       advertised as used or refurbished.
  43.  
  44.   4.  Mega style full height case 12"x14"x3.5"  ($40 from IB Computers
  45.       (503)/297-8425).  I believe their cables are over priced.
  46.   5.  One 34 pins cable with 3 board end connectors.
  47.   6.  Two 24 pins cable each with a socket connector and a board end
  48.       connector.
  49.  
  50.   7.  A chip from BMS ($20) to replace a chip in the Atari Board
  51.       and corresponding installation software.  My version of AHG.PRG
  52.       and HDX.PRG would not work with 2 drives or with just the
  53.       st251-1.  When the BMS software is installing the harddrive
  54.       partitions upon booting, the software reads each partition until
  55.       it encounters a read error.  My understanding is the Atari chip
  56.       does not report read errors which would cause the BMS software to
  57.       install several partitions.  The BMS people were very helpful.
  58.       BMS = Berkeley Microsystems (415) 547-2191
  59.  
  60.   8.  A power plug connector for the st251-1.  I configured the voltages
  61.       on this plug the same as the sh204 plug.  The sh205 power plug will
  62.       fit into the st251-1.  Since I could not find the correct plug, I
  63.       bought a similar one and cut it into shape.  VERY IMPORTANT -
  64.       be certain of your voltage wiring - +12 +0 +0 +5
  65.  
  66.   9.  Bezel. (not important).  My case has no front cover.  The front
  67.       cover is supplied by the 2 drives and the bezel.
  68.  
  69. Connections:
  70.  
  71.   *   The drives are mounted with the boards facing down.  Both drives
  72.       are 1/2 height 5 1/4 drives.
  73.  
  74.   *   The colored strip on the connectors is pin 1.  The board socket
  75.       connectors have numbers on them showing some of the pins.  The
  76.       board end connectors have a cut or slit near pin 1.
  77.  
  78.   *   Set drive 1 by moving the jumpers to ds1.
  79.       Set drive 0 by moving the jumpers to ds0.
  80.  
  81.   *   Drive 0 must be connected to the controller via the outside 24 pin socket
  82.       connector.
  83.       Drive 1 must be connected to the controller via the inside 24 pin socket
  84.       connector.
  85.  
  86.   *   The terminal resister pack must be removed from drive 0.
  87.       The terminal resister pack must not be removed from drive 1.
  88.       On both of my drives, the terminal resistor pack was yellow,
  89.       about 1 inch long, had 8 pins, appeared to be soldered but
  90.       it isn't, in plain view, and easily accessible.
  91.  
  92. Mounting:
  93.  
  94. The holes for mounting the drives are pre drilled into the case.  The
  95. equipment inside of my case includes: 2 drives.  controller, Atari board,
  96. fan and cables.  My power supply is external.  I hacked up parts in the
  97. sh204 case to use in my new case.  I used the parts to mount the controller
  98. over the old drive and to mount the Atari board to the rear of the case.  I
  99. also used the fan from the sh204.  The top of the case is not sturdy.  I
  100. bought some harddrive mechanism hardware to provide additional top
  101. strength.  This part was trial and error.
  102.  
  103. Good Luck
  104.  
  105. Gregory Gibson
  106.  
  107. ------------------------------
  108.  
  109. Date: 26 Feb 90 00:22:55 GMT
  110. From: zephyr.ens.tek.com!orca.wv.tek.com!pogo!bluneski@beaver.cs.washington.edu
  111.  (Bob Luneski)
  112. Subject: Directory Limits??!!
  113. Message-ID: <8609@pogo.WV.TEK.COM>
  114.  
  115. In <276.25E65B7C@uscacm.UUCP> Ron Hollins writes:
  116.  
  117. > Question:  Is there a limit to the total number of files that a
  118. >double-sided floppy disk can contain.
  119.  
  120. The root directory of a standard floppy disk is limited to 112 entries.
  121. (7 sectors * 512 bytes/sector) / 32 bytes per entry = 112
  122. Subfolders are limited only by disk space.
  123.  
  124. >I suspect that the 'FAT' must have a ceiling to it.
  125.  
  126. Not one that you can violate. The standard 5 sector 12bit FAT table has
  127. space for over 1700 data cluster entries whereas a 80 track 9 sector/track
  128. double sided disk has only 709 data clusters.
  129.  
  130. >might you also suggest a technique to trap for this disk 'error'.
  131.  
  132. You should receive a -36L DOS error code = Access denied if you attempt
  133. to create a file in this situation.
  134.  
  135. ____________________________________________________________________________
  136.   Bob Luneski
  137.   Diamond Back Support Hotline:  bluneski@pogo.WV.TEK.COM
  138.                                  Genie: B.LUNESKI1
  139.  
  140.   The opinions expressed herein are my own and in no way reflect the
  141.   opinions of Tektronix, Inc.
  142.  
  143. ------------------------------
  144.  
  145. Date: 26 Feb 90 05:09:29 GMT
  146. From: zaphod.mps.ohio-state.edu!sunybcs!marcotte@tut.cis.ohio-state.edu  (brian
  147.  r marcotte)
  148. Subject: OS-9
  149. Message-ID: <18319@eerie.acsu.Buffalo.EDU>
  150.  
  151. Does anyone know where I can buy OS-9 for the ST? Hopefully for less than
  152. Microware's list prices ($150/$600).
  153.  
  154.                                         - Brian Marcotte
  155.  
  156. ------------------------------
  157.  
  158. Date: 26 Feb 90 03:52:30 GMT
  159. From: maytag!water!ljdickey@iuvax.cs.indiana.edu  (L.J.Dickey)
  160. Subject: Terminal desk accessory
  161. Message-ID: <3024@water.waterloo.edu>
  162.  
  163. In article <25E74384.25975@paris.ics.uci.edu> wngai@paris.ics.uci.edu (Wayne
  164.  Ngai) writes:
  165. >Does anyone knows of any good terminal DESK ACCESSORY (like the one come
  166. >with the atari system disk)???
  167.  
  168. I can think of one:  WTERM .
  169.  
  170. There are at least two programs called WTERM, and one of them is
  171. available from the ftp site called "terminator", in the directory
  172. "telecomm":
  173.  
  174. -rw-r--r--  1          46592 Apr 12 02:18 wterm.arc
  175.  
  176. The distinction of each is that it runs in a window.
  177.  
  178. --
  179.     L. J. Dickey, Faculty of Mathematics, University of Waterloo.
  180.         ljdickey@water.UWaterloo.ca     ljdickey@water.BITNET
  181.         ljdickey@water.UUCP             ..!uunet!watmath!water!ljdickey
  182.         ljdickey@water.waterloo.edu
  183.  
  184. ------------------------------
  185.  
  186. Date: 26 Feb 90 04:15:43 GMT
  187. From: maytag!water!ljdickey@iuvax.cs.indiana.edu  (L.J.Dickey)
  188. Subject: Terminal desk accessory
  189. Message-ID: <3026@water.waterloo.edu>
  190.  
  191. In article <25E74384.25975@paris.ics.uci.edu> wngai@paris.ics.uci.edu (Wayne
  192.  Ngai) writes:
  193. >Does anyone knows of any good terminal DESK ACCESSORY (like the one come with
  194. >the atari system disk)???
  195.  
  196. I can think of one:  WTERM .
  197.  
  198. There are at least two programs called WTERM, and one of them is
  199. an accessory available from the ftp site called "terminator", in
  200. the directory "telecomm":
  201.  
  202.         -rw-r--r--  1          46592 Apr 12 02:18 wterm.arc
  203.  
  204. The distinction of WTERM is that it runs in a window.
  205.  
  206. --
  207.     L. J. Dickey, Faculty of Mathematics, University of Waterloo.
  208.         ljdickey@water.UWaterloo.ca     ljdickey@water.BITNET
  209.         ljdickey@water.UUCP             ..!uunet!watmath!water!ljdickey
  210.         ljdickey@water.waterloo.edu
  211.  
  212. ------------------------------
  213.  
  214. Date: 26 Feb 90 01:18:06 GMT
  215. From: cs.columbia.edu!cunixf!cunixd.cc.columbia.edu!ia4@columbia.edu  (Imran
  216.  Anwar)
  217. Subject: Will MacPrint Work Under Mac Emulation & Print to HP Laserjet IIp
  218. Message-ID: <1990Feb26.011806.27845@cunixf.cc.columbia.edu>
  219.  
  220. Hope David Small will answer :-)
  221.  
  222. I have bought the HP LJ IIp and use it with the Mega4 ST. Works fine.  But I
  223. have a question.  I bought a program for the Mac called Macprint which comes
  224. with a Mac - Laserjet cable and works quite well.
  225.  
  226. Will this program work under Mac emulation on the ST with.....
  227. a) Magic Sac
  228. b) Spectre GCR
  229.  
  230. PLEASE confirm or deny urgently......thanks.....
  231.  
  232. Imran Anwar
  233.  
  234. PS If there is any Spectre GCR owner in New York City reading this.....could I
  235. invite you over with your Spectre and ROMs to test it out....I have the brand
  236. new sealed Macprint.....and the ST....and the Laserjet....and the burning
  237. desire to test the theory :-) ..... email me or call (212) 666-5555 or 666-1111
  238. Both are my home numbers......thanks.....
  239.  
  240. ------------------------------
  241.  
  242. End of INFO-ATARI16 Digest V90 Issue #259
  243. *****************************************
  244.